Onboard Memory; Remote Logging Initiation; Manual Retrieval Of Logged Data; Remote Retrieval Of Logged Data - Novatel OEM6 Series User Manual

Chapter 4

If ICOM port security is enabled (using the IPSERVICE command), commands are refused
until the LOGIN command is issued. Refer to 2.6 OEM638 Card Security on page 35 of this
manual and the
details.

A maximum of 255 files can be stored (depending on individual file sizes).
4.8.1

Onboard Memory

The DIRENT log lists the current contents of the receiver's onboard memory. Up to 512 files can be listed
using this message. Refer to the DIRENT log in the
(OM-20000129) for details.
4.8.2

Remote Logging Initiation

Once a Wi-Fi or Ethernet connection is established, send the LOGFILE OPEN command to begin logging
data.
4.8.3

Manual Retrieval of Logged Data

By default, USB is configured to automatically download data stored on the internal flash memory to a
memory stick. To change to manual download, use the SETFILECOPYMODE command to change the
functionality of USB.
If USB functionality is changed to manual, issue the DOSCMD command to manually transfer stored data
to a memory stick (internal flash storage only). Refer to
(OM-20000129) for details on each command.
4.8.4

Remote Retrieval of Logged Data

The FTP server on the OEM638 card allows access to the internal flash memory. There is a limitation of
one connection at any given time. This not only means that only one user can access the FTP server at a
time but the FTP Client software must be set to only use one connection.

The default password is the PSN of the receiver. Before connecting the OEM638 to a
network, use the
to OEM6 Firmware Reference Manual
Use the LOG command to specify the logs to send to the onboard memory. For example, a standard
logging configuration for GPS-INS-only post-processing applications would be:
LOG FILE RANGECMPB ONTIME 1
LOG FILE RAWEPHEMB ONNEW
LOG FILE RAWIMUSB ONNEW
LOG FILE IMUTOANTOFFSETSB ONNEW

If a Wi-Fi connection is lost during the downloading of logs, the log is resent, in entirety,
once network communication is reestablished.
4.8.5

Naming Logs

File names for logs can be customized or the OEM638 can be set to automatically name files.
66
OEM6 Family Firmware Reference Manual
SETADMINPASSWORD
(OM-20000129) for command details.
OEM6 Family Installation and Operation User Manual Rev 7
Operation OEM6 Cards and Enclosure
(OM-20000129) for command
OEM6 Family Firmware Reference Manual
OEM6 Firmware Reference Manual
command to change the default password. Refer