Novatel WAAS G-III User Manual page 137

Technical Specifications
Connector
Baud Rate
Standard
See Table 55 on page 138 for specifications on the external frequency reference.
Connector
Capture Range
Sensitivity
Connector
Output
Connector
Output Level
Frequency
Pulse Width
Polarity
Fall Time (90% to 10%)
Rise Time (10% to 90%)
Voltage (high)
Voltage (low)
Nominal Load Impedance
Connector
RF Output
Connector
RF Input Frequencies
Power
WAAS G-III Reference Receiver User Manual Rev 1
J05 MAINT
DE9P
115200 bps
RS-232C
J06 10 MHZ IN
TNC female
10 MHz ± 1Hz
0 dBm to +17 dBm into 50
J07 10 MHZ OUT
TNC female
10 MHz reference signal within ±3 dB of 10 MHz input (J06)
J09 1 PPS OUT
TNC female
1 Hz
1 ms ±25 ns
Active high pulse
< 5 ns
< 5 ns
> 2.4 VDC
< 0.55 VDC

50
J10 RF1 OUT
TNC female
L1, L2 and L5 signals received from RF1 IN port (J11)
This signal is attenuated by the value set on the software adjustable
attenuator.
ANTENNA INPUT (J11 RF1 IN)
TNC female
L1(1575.42 MHz), L2 (1227.6 MHz), L5 (1176.45 MHz)
11.7 VDC to 14.0 VDC
<250 mA
<100 mV (p-p) ripple

Appendix A
137