Ecutoff 10.0 - Novatel WAAS G-III User Manual

Chapter 4
4.4.9 ECUTOFF
This command sets the elevation cut-off angle for all SV channels assigned to track GNSS satellites. The
receiver does not attempt to acquire a satellite until it rises above the cut-off angle (unless the TRACKMODE
is set to ALL). Tracked satellites that fall below the cut-off angle are no longer tracked unless they were
manually assigned using the ASSIGN command.
If the G-III Reference Receiver has not yet received an almanac, does not have a position entered or does not
have time computed, the satellites below the cut-off angle may be tracked.
Valid States:
Valid Modes:
Acceptable Ports:
Syntax:
ECUTOFF angle
Example:

ECUTOFF 10.0

Field Field Name
1 angle
54
Configuration
Normal
Data
Elevation cut-off angle relative to horizon in degrees.
(decimal degrees)
Description
WAAS G-III Reference Receiver User Manual Rev 1
Commands
Range Precision
0 to 90 Double