Saveports - Novatel WAAS G-III User Manual

Chapter 4

4.4.22 SAVEPORTS

This command saves the Ethernet, IP and ICOM configuration to non-volatile memory (NVM). When the
receiver restarts, this saved configuration will override the receiver defaults.
To erase the saved configuration, use the RESTORE command (see Section 4.4.19 RESTORE on Page 69).
Note that the RESTORE command will restart the receiver.
Valid States:
Valid Modes:
Acceptable Ports:
Syntax:
SAVEPORTS
Example:
SAVEPORTS
72
Configuration, Maintenance
Normal, Failed
Maintenance
WAAS G-III Reference Receiver User Manual Rev 1
Commands