Smart7 Leds; Figure 4: Smart7 Leds Location; Table 3: Smart7 Status Indicators; Table 4: Wi-Fi Led - Novatel SMART7 Installation And Operation Manual

Chapter 1 SMART7 Overview

1.3 SMART7 LEDs

The SMART7 has up to three LEDs (model dependent) to indicate receiver status.
The following tables provide information about the SMART7 LEDs and their states.
Label
State
Green
Configured as an Access Point (default)
Solid
SMART7 Installation and Operation User Manual 0C
From P1
2 2
3 3
4 4
Shell Shell

Figure 4: SMART7 LEDs Location

Table 3: SMART7 Status Indicators

Description
Wi-Fi mode (AP, Concurrent or Client)
Ethernet (DATA)
Status (Power/GNSS)

Table 4: Wi-Fi LED

To J1 Signal Name
Rx+
Tx-
Rx-
Chassis GND
SMART7-I and SMART7-W
SMART7-I
All variants
Description
Variants
18