Operations In Live View Mode; Using The Mouse In Live View - HIKVISION DS-7604NI-KI/W User Manual

3.2 Operations in Live View Mode

3.2.1 Using the Mouse in Live View

Name
Common Menu
Menu
Single Screen
Multi-screen
Previous Screen
Next Screen
Start/Stop
Auto-switch
Start Recording
Add IP Camera
Playback
PTZ Control
.Network Quick
Settings
Output Mode
 The dwell time of the live view configuration must be set before using Start Auto-switch.
 If the corresponding camera supports intelligent function, the Reboot Intelligence option is
included when right-clicking mouse on this camera.
Network Video Recorder User Manual
Table 3-2 Mouse Operation in Live View
Description
Quick access to the sub-menus which you frequently visit.
Enter the main menu of the system by right clicking the
mouse.
Switch to the single full screen by choosing channel number
from the dropdown list.
Adjust the screen layout by choosing from the dropdown list.
Switch to the previous screen.
Switch to the next screen.
Enable/disable the auto-switch of the screens.
Start continuous recording or motion detection recording of
all channels.
Enter the IP Camera Management interface, and manage the
cameras.
Enter the playback interface and start playing back the video
of the selected channel immediately.
Enter the PTZ control interface.
Configure the Hik-Connect, DDNS, UPnP, DHCP, PPPoE
settings.
Four modes of output supported, including Standard, Bright,
Gentle and Vivid.
50