Configuring Dst Settings; Configuring More Settings For Device Parameters - HIKVISION HWN-2100H Series User Manual

Configuring DST Settings

Go to Menu >Configuration>General.
Choose DST Settings.
You can check the checkbox before the Auto DST Adjustment item.
Or you can manually check the Enable DST checkbox, and then you choose the
date of the DST period.
Configuring More Settings for Device
Parameters
Go to Menu >Configuration>General.
Click More Settings to enter the More Settings interface, as shown in Figure 13-3
Configure the following settings:
Device Name: Edit the name of NVR.
Device No.: Edit the serial number of NVR. The Device No. can be set in the range of
1~255, and the default No. is 255. The number is used for the remote and keyboard
control.
Auto Logout: Set timeout time for menu inactivity. E.g., when the timeout time is set
to 5 Minutes, then the system will exit from the current operation menu to live view
screen after 5 minutes of menu inactivity.
Menu Output Mode: You can choose the menu display on different video output. By
TM
default, only HDMI
Click the Apply button to save the settings.
Network Video Recorder User Manual
DST Settings Interface
More Settings Interface
/VGA is selectable.
139
.