Table of Contents
Advertisement
9.1 Configuring General Settings
Purpose:
Network settings must be properly configured before you operate NVR over network.
Steps:
4.
Enter the Network Settings interface.
Menu > Configuration > Network
5.
Select the General tab.
6. In the General Settings interface, you can configure the following settings: Working Mode, NIC Type, IPv4
Address, IPv4 Gateway, MTU and DNS Server.
If the DHCP server is available, you can click the checkbox of DHCP to automatically obtain an IP address
and other network settings from that server.
For the models which have the PoE or built-in switch network interfaces, including DS-7104NI-E1/4P,
DS-7108NI-E1/8P, DS-7104NI-E1/4P/M and DS-7108NI-E1/8P/M series NVR, the internal NIC IPv4
address should be configured for the cameras connecting to the PoE or built-in switch network
interface of the NVR.
The valid value range of MTU is 500 ~ 9676.
7.
After having configured the general settings, click Apply button to save the settings.
Network Video Recorder User Manual
Figure 9. 1 Network Settings
127
Advertisement
Table of Contents
