Starting Up And Shutting Down The Nvr - HIKVISION DS-96128NI-F16 Series User Manual

User Manual of Network Video Recorder

2.1 Starting Up and Shutting Down the NVR

Purpose:
Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
Before you start:
Check that the voltage of the extra power supply is the same with the NVR's requirement, and the ground
connection is working properly.
Starting up the NVR:
Steps:
1. Plug the power supply into an electrical outlet. It is HIGHLY recommended t plug that an Uninterruptible
Power Supply (UPS) be used in conjunction with the device. The Power indicator LED should turn blue
indicating that the unit begins to start up.
2. After startup, the Power indicator LED remains blue.
Shutting down the NVR
There are two proper ways to shut down the NVR.

OPTION 1: Standard shutdown
Steps:
1. Enter the Shutdown menu.
Menu > Shutdown
2. Click the Shutdown button.
3. Click the Yes button.

OPTION 2: By operating the front panel
Steps:
1. Press and hold the POWER button on the front panel for 3 seconds.
2. Enter the administrator's username and password in the dialog box for authentication if needed.
3. Click the Yes button.
Do not press the POWER button again when the system is shutting down.
Rebooting the NVR
In the Shutdown menu, you can also reboot the NVR.
Steps:
1. Enter the Shutdown menu by clicking Menu > Shutdown.
2. Click the Logout button to lock the NVR or the Reboot button to reboot the NVR.
Figure 2. 1 Shutdown Menu
22