User Manual of Network Video Recorder
5. You can click Array tab to view the information of the successfully created array.
By default, one-touch configuration creates an array and a virtual disk.
6. Click Virtual Disk tab to view the automatically created virtual disk.
By default, one-touch configuration adopts background initialization to initialize the virtual disk, thus
the virtual disk can be used immediately.
7. You can see the information of the logical disk in the HDD Information interface.
For configuring hot spare disk manually, please refer to steps 12-15 of Chapter 10.1.2.
12.1.2 Manually Creating Array and Virtual Disk
Purpose:
You can manually create the array of RAID 0, RAID 1, RAID 5 and RAID 10.
In this section, we take RAID 5 as an example to describe the manual configuration of array and virtual disk.
Steps:
1. Enter the Physical Disk Settings interface.
Menu > HDD > RAID > Physical Disk
Figure 12. 4 Array Settings Interface
Figure 12. 5 Virtual Disk Settings Interface
186