Checking The Network Status - HIKVISION iDS-9632NXI-I8/16S User Manual

Click Refresh button if the connected local backup device cannot be displayed. When it fails to
detect the backup device, please check whether it is compatible with the NVR. You can format the
backup device if the format is incorrect.
Step 4 Click Export button to start exporting.
Step 5 After the exporting is complete, click OK to finish the packet export, as shown in Figure
13-27.
Up to 1M data can be exported each time.

13.4.3 Checking the Network Status

Purpose:
You can also check the network status and quick set the network parameters in this interface.
Steps:
Click the Status button on the lower- right corner of the page.
Network Video Recorder User Manual
Figure 13-26 Export Network Packet
Figure 13-27 Packet Export Attention
193