Configuring Ddns - HIKVISION DS-7100NI-E1 Series User Manual

9.2.2 Configuring DDNS

Purpose:
You can set the Dynamic DNS (DDNS) to be used for network access.
Prior registration with your ISP is required before configuring the system to use DDNS.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the DDNS tab to enter the DDNS Settings interface.
3. Check the Enable DDNS checkbox to enable this feature.
4. Select DDNS Type. Five different DDNS types are selectable: DynDNS, PeanutHull, NO-IP.
•
DynDNS:
1) Enter Server Address for DynDNS (i.e. members.dyndns.org).
2) In the NVR Domain Name text field, enter the domain obtained from the DynDNS website.
3) Enter the User Name and Password registered in the DynDNS website.
•
PeanutHull: Enter the User Name and Password obtained from the PeanutHull website.
•
NO-IP:
Enter the account information in the corresponding fields. Refer to the DynDNS settings.
5) Enter Server Address for NO-IP.
6) In the NVR Domain Name text field, enter the domain obtained from the NO-IP website
Network Video Recorder User Manual
Figure 9. 7 DynDNS Settings Interface
Figure 9. 8 PeanutHull Settings Interface
131