9.1 Setting Motion Detection Alarm
Step 1 Go to Menu> Camera> Motion.
Step 2 Select a camera you want to set up motion detection.
Step 3 Set up detection area and sensitivity.
Tick "Enable Motion Detection", use the mouse to draw detection area(s) and drag the
sensitivity bar to set sensitivity.
Click
button and set alarm response actions.
Step 4 Click Trigger Channel tab and select one or more channels which will start to record/capture
or become full-screen monitoring when motion alarm is triggered, and click Apply to save
the settings.
Network Video Recorder User Manual
Chapter 9 Alarm Settings
Figure 9-1 Motion Detection Setup Interface
Figure 9-2 Set Trigger Camera of Motion Detection
126