Table of Contents
Advertisement
Note
Video applications do not
apply to the MCP touch
panels.
Figure 153
Button Types and descriptions
ViewPoint Wireless Touch Panels
— BORDER
Select this option and a button to store the default border in
touch panel memory. The default border is automatically applied to all new
buttons.
— SIZE
Select this option and a button to store the button size in touch panel
memory. Then, use the SET DEFAULT option to automatically resize a
button to the default size.
— COLOR & BORDER
color and border in touch panel memory. The default color and border is
automatically applied to all new buttons.
— ALL
Select this option and a button to store the default color, border, and
size in touch panel memory. These default settings are automatically applied
to all new buttons.
Set default
Press the SET DEFAULTS option and a button to automatically reset the button's
color, border, and size according to the default settings stored in touch panel
memory. You can use the SAVE DEFAULTS option to store new default settings in
touch panel memory.
Put on top
Press PUT ON TOP and a select button to place the button in front of another button
on the current panel page. This option is useful when constructing multi-layered
buttons.
Properties Page - Button Types
The following paragraphs describe the Button Properties page for each button type.
The available button types and a brief description of each are listed in Figure 153.
Button Types
Button Type
Description
General
Sets the button to automatically send a message to the Central
Controller via the AXlink connector, PC via the RS-232 connector, or
with WAVE wireless communication.
Joystick
Sets the button to a joystick that includes a control stick. When you
move the control stick, the touch panel sends feedback (data) to the
Central Controller and to the external device to perform a pre-
programmed operation.
Select this option and a button to store the default
Touch Panel Program Reference
99
Advertisement
Table of Contents
