Automatically Set Ssid; Manually Set Ssid - AMX MVP-8400ii Operation/Reference Manual

Automatically set SSID

In the Protected Setup page:
1.
Select Wireless Settings.
2.
Press the Site Survey button.
3.
Select a WEP secured WAP from within the Wireless Site Survey page, and press the Connect button.
FIG. 20 Site Survey of available WAPs (Secured WAP shown selected)
4.
Write down the SSID name, Current Key string value, and panel MAC Address information so you can later enter it
into the appropriate WAP dialog fields in order to "sync-up" the secure connection. These values must be identically
reproduced on the target WAP.

Manually set SSID

In the Protected Setup page:
1.
Select Wireless Settings.
2.
In the IP Settings section, press the DHCP/Static field until it reads "Static".
FIG. 21 Wireless Settings page
MVP-8400i 8.4" Modero® ViewPoint® Touch Panel with Intercom
Configuring Communications
Select a target
WAP with the
desired level of
security
Connecting to the
WAP begins the
communication
21