Gray Scale And Programming Numbers - AMX Wireless Touch Panels (Wave Server) Instruction Manual

Warning
You should only use the ZAP!
command to erase all the
stored data in the touch panel.
The data cannot be recovered
after it is erased.
ViewPoint Wireless Touch Panels
System Send_Commands (Cont.)
Command
"'WAKE'"
"'XMTO <number>'"
"'XMRT <number>'"
"'ZAP!'"

Gray Scale and Programming Numbers

Gray scale shades for the VPT-GS are obtained by using color programming numbers
72-86. These numbers correspond to the basic 16 shades of gray.
Description
Deactivate screen-saver mode and reset sleep timer.
Example:
SEND_COMMAND TP,"'WAKE'"
Deactivates the touch panel screen-saver mode and resets the
sleep timer.
Set the new network communication delay for the panel and
SOFTROM.
<number> = 4-30 ASCII characters
Example:
SEND_COMMAND TP,"'XMTO 5'"
Sets the new delay time to 5 seconds.
Set the new network communication retry value for the panel
and SOFTROM.
<number> = 1-15 ASCII characters
Example:
SEND_COMMAND TP,"'XMRT 9'"
Sets the number of retries to 9.
Clear all memory and erase buttons, pages, drawings, and
symbols.
Example:
SEND_COMMAND TP,"'ZAP!'"
Clears all memory and erases all buttons, pages, drawings,
and symbols.
AXCESS Programming 141