Baud; Device Base - AMX Wireless Touch Panels (Wave Server) Instruction Manual

Figure 94
Protected Setup page
Figure 95
BAUD button
Note
Make sure to match the baud
rate for communications with
TPDesign3.xx.
ViewPoint Wireless Touch Panels

Baud

The BAUD button (Figure 95) sets the baud rate. The baud rate is automatically set to
38.4. The BAUD rate is for communicating with your PC when downloading a
program or new firmware.
• Press the UP and DN buttons to set the data communication speed
BAUD
with the . Available baud rates are 300, 600, 1200, 2400, 4800, 9600, 19.2, and
38.4.

Device base

Press the DEVICE BASE button (Figure 96) to open a keypad and set the base address
for the touch panel. The base address range is from 1 through 255.
Touch Panel Program Reference 71