Wireless Status For Vpw-Cp And Vpw-Gs - AMX Wireless Touch Panels (Wave Server) Instruction Manual

68 Touch Panel Program Reference
5 minutes. The touch panel wakes up when you touch the screen for more
than .5 seconds.
•
ViewPoint Module
•
Module Version VX.XX
the ViewPoint.
•
Battery Voltage XX.X
Hydride rechargeable battery.
•
Battery Not Charging/Battery Charging
appears when the Nickel Metal Hydride battery is not charging. Battery
Charging appears when the Nickel Metal Hydride battery is charging. The
shaded area in the horizontal gauge button moves from left-to-right as the
battery voltage level increases.
•
Supply Voltage VX.XX
supply connected to the ViewPoint.
•
AMX RF ON / OFF
•
AMX IR 38 kHz/455 kHz/OFF
38 kHz, 455 kHz, or off.

Wireless Status for VPW-CP and VPW-GS

The WIRELESS STATUS button appears on the Setup page. The ViewPoint provides
two-way RF control and provides one-way IR signaling. The ViewPoint contains a
Nickel Metal Hydride rechargeable battery that supplies independent power to the
touch panel. Press the WIRELESS SETTINGS button to open the page shown in
Figure 92.
Not functional at this time.
Shows the ROM firmware version installed in
Shows the voltage level of the Nickel Metal
Shows the voltage level of the external power
Toggles RF transmission on or off.
Toggles the IR transmitting frequency to
Battery Not Charging
ViewPoint Wireless Touch Panels