Selection Buttons; Information Buttons; Adjustment Buttons; Keypad Buttons - AMX Wireless Touch Panels (Wave Server) Instruction Manual

Figure 10
Selection button example
Note
These button types will be
displayed in black and yellow
to indicate that they are only
for information and can't be
changed.
Figure 11
Information button example
Figure 12
Adjustment button example
ViewPoint Wireless Touch Panels

Selection buttons

Selection buttons (Figure 10) appear on touch panel pages and set communication
parameters.

Information buttons

Information buttons contain serial numbers and firmware version information. The
properties of these buttons cannot be changed. Figure 11 shows the serial number
information button in the Setup page.

Adjustment buttons

You can use the UP and DN buttons to set adjustment buttons. The adjustment
button example in Figure 12 sets the baud rate for the RS-232 connector on the touch
panel.

Keypad buttons

The keypad button opens a keypad (Figure 13) so you can enter a password or value
assignment. All keypad buttons are interactive except for the entry display.
Touch Panel Basics 15