Horizontal Bargraph - AMX Wireless Touch Panels (Wave Server) Instruction Manual

ViewPoint Wireless Touch Panels
— BARGRAPH DISPLAY
external devices. Indicator levels must be defined in the AXCESS software
program.
— BARGRAPH ACTIVE
external devices. Indicator levels must be defined in the AXCESS software
program. When a control level is set on the vertical bargraph, control data is
sent to the Central Controller to control an external device.
— BARGRAPH CENTERING
default control level. Levels must be defined in the AXCESS software
program. When a control level change is sent to the Central Controller, the
external device changes accordingly until the control data input stops. Then
the control level on the vertical bargraph returns to the default position and
the external device returns to a default control position.
— SLIDER DISPLAY
external devices. Levels must be defined in the AXCESS software program.
— SLIDER ACTIVE
Control levels must be defined in the AXCESS software program. When a
control level is set on the vertical bargraph, data is sent to the Central
Controller to control an external device.
— SLIDER CENTERING
default control level. Control levels must be defined in the AXCESS software
program. When a control level change is sent to the Central Controller, the
external device changes accordingly until the control data input stops. Then
the control level on the bargraph returns to the default position and the
external device returns to its default control position.
— BATTERY VOLTAGE
battery (if equipped).
• Opens the keyboard where you enter the data string to be sent
STRING
to the Central Controller via AXlink or RF communications. The data string
appears in the STRING button. Press ABORT to close the menu.
For a description of the other items in this page, refer to the Properties subsection.

Horizontal Bargraph

Select HORIZONTAL BARGRAPH from the Button Types menu to set the selected
button as a Horizontal Bargraph button (VPW-CP/VPW-GS only). The button type
HORIZONTAL BARGRAPH and associated options appear in the Button Properties
page as shown in Figure 164.
Sets the bargraph as a vertical indicator for
Sets the bargraph as a vertical controller for
Sets the bargraph as a vertical controller with a
Sets the slider as a horizontal status indicator for
Sets the slider as a controller for external devices.
Sets the slider as a horizontal controller with a
Sets the button to show the voltage level of the
Touch Panel Program Reference 107