Creating A Bargraph - AMX Wireless Touch Panels (Wave Server) Instruction Manual

Figure 61
Color palette
Note
The VPT-GS will display gray
shades for selection.
Note
Joysticks actually use two
level numbers. The first is for
the X-axis and the second is
for the Y-axis. You only need
to specify the first level.
Note
Bargraphs will function on
VPW-CP/VPW-GS only.
Figure 62
Bargraph
48 Designing Touch Panel Pages
Press black to set the border color.
4.
Press the FILL button in the Button Properties page to open the color palette.
5.
Press white to set the fill color.
6.
Press the TEXT button to open the palette.
7.
8. Press red to set the text color.
Press EXIT SAVE CHANGE in the Button Properties page to store the new
9.
button properties into memory and return to the current page
Press EXIT on the PROPERTIES operation bar
10.

Creating a Bargraph

Bargraphs (Figure 62) are level monitors and adjustable level controls. These levels
can be configured to monitor audio outputs, lighting levels, and adjust audio or light
levels. Before you start, make sure to connect the touch panel to your Central
Controller; otherwise, the bargraph may not work properly. Refer to the Touch Panel
Program Reference.
ViewPoint Wireless Touch Panels