Table of Contents
Advertisement
Figure 104
POWER UP MESSAGE
button
Figure 105
SYSTEM PAGE button
Figure 106
System page
Warning
The System page should only
be used to purge unwanted
buttons, bitmaps, icons, fonts,
and stored touch panel
settings. Before using this
page, make sure you have a
backup copy of the touch
panel program stored in the
TPDesign3 software program.
If you press YES on any of
the DELETE buttons, the
stored data is permanently
erased from panel memory.
Figure 107
Delete All Buttons decision
button
ViewPoint Wireless Touch Panels
message is received. Refer to the AXCESS Programming section for detailed
programming information.
System page
Press the SYSTEM PAGE button (Figure 105) to open the System page (Figure 106).
•
DELETE ALL BUTTONS
Figure 107. Press YES to clear all touch panel buttons or NO to cancel the
operation.
Opens the decision button shown in
Touch Panel Program Reference
75
Advertisement
Table of Contents
Need help?
Do you have a question about the Wireless Touch Panels (Wave Server) and is the answer not in the manual?