System Send_Commands - AMX Wireless Touch Panels (Wave Server) Instruction Manual

Wireless touch panels (wave server)
Table of Contents

Advertisement

Figure 201

System Send_Commands

ViewPoint Wireless Touch Panels
System Send_Commands
System Send_Commands (Figure 201) are stored in the AXCESS Control System and
direct the Touch Panel to perform various operations.
System Send_Commands
Command
"'ABEEP'"
"'ADBEEP'"
"'AKEYB-<text string>'"
"'AKEYP-<number
string>'"
Description
Output one panel beep even if the Beep value is set to 0 in the
Setup page.
Example:
SEND_COMMAND TP,"'ABEEP'"
Beeps the panel.
Output a double-beep even if the double beep value is set to 0
in the Setup page.
Example:
SEND_COMMAND TP,"'ADBEEP'"
Double-beeps the panel.
Open the touch panel keyboard and initialize the text string
entry. The keyboard string is set to null during power-up and is
stored until power-down.
<text string> = 0 - 59 characters
Example:
SEND_COMMAND TP,"'AKEYB-TOUCH HERE'"
Opens the touch panel keyboard with TOUCH HERE in the
display.
Open the touch panel keypad and initialize the number string
entry. The keypad string is set to null during power-up and is
stored until power-down.
<number string> = 0 - 9999
Example:
SEND_COMMAND TP,"'AKEYP-1988'"
Opens the touch panel keypad with 1988 in the display.
AXCESS Programming
135

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wireless Touch Panels (Wave Server) and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Viewpoint wireless touch panelsViewpoint

Table of Contents

Save PDF