Editor - AMX Wireless Touch Panels (Wave Server) Instruction Manual

Figure 113
FONTS menu
Note
You can use the TPDesign3
software program to import
variable fonts into the panel.
Warning
You should only use the
FACTORY RESET button to
erase all stored data in the
touch panel. The data cannot
be recovered after it is
erased.
Figure 114
CLEAR MEMORY decision
button
Figure 115
EDITOR button
Note
You can exit from the on-
board editor by pressing the
QUIT EDITOR button on the
Edit bar. Refer to the Edit Bar
– Quit Editor option
subsection for detailed
information.
78 Touch Panel Program Reference
•
FACTORY RESET
YES to clear all touch panel memory or NO to cancel the operation.

Editor

Press EDITOR (Figure 115) in the Protected Setup page to activate the EDIT mode.
When you exit the Protected Setup page, the EDIT button appears on the top or
bottom of the LCD. Press the EDIT button to open the Edit bar (Figure 116) and create
buttons, pages, popup pages, and set a wide variety of touch panel settings. The
active touch panel page name also appears in the active Edit bar. For example, the
Edit bar sample in Figure 116 shows the current page name is New page. Because
there are so many operations associated with the EDIT button, they are described in
the Edit button subsection.
Opens the decision button shown in Figure 114. Press
ViewPoint Wireless Touch Panels