Figure 216
Communications settings
Note
Make sure that the ViewPoint
touch panel is set to the same
Baud rate as your computer.
Figure 217
Change Directory dialog
164
Loading Infrared (IR) Files
4.
After the Database has been created, press
appears.
Select your computer's Com port and baud rate that you wish to communicate
5.
with the ViewPoint touch panel.
Then, press
6.
F10.
When the Communications screen has disappeared, press
7.
keyboard. Use the up/down arrow keys and select Change Directory. The dialog
in Figure 217 will appear.
and select Configure. Figure 216
F5
on your computer
F1
ViewPoint Wireless Touch Panels
Need help?
Do you have a question about the Wireless Touch Panels (Wave Server) and is the answer not in the manual?