Print Settings; Setup Menu - Konica Minolta Bizhub 4020 User Manual

Print Settings

Setup menu

Use
Printer Language
PCL Emulation
PS Emulation
Job Waiting
On
Off
Print Area
Normal
Whole Page
User's Guide
To
Set the printer language.
Notes:
• PCL Emulation is the factory default setting.
• Setting a printer language as the default does not prevent
a software program from sending print jobs that use
another printer language.
Specify that print jobs be removed from the print queue if they
require unavailable printer options or custom settings.
Print jobs removed from the print queue are stored in a
separate print queue, so other jobs print normally. When the
missing information or options are obtained, the stored jobs
print.
Notes:
• Off is the factory default setting.
• This menu setting appears only when a formatted,
working printer hard disk is installed. This requirement
ensures that stored jobs are not deleted if the printer loses
power.
Set the logical and physical printable area.
Notes:
• Normal is the factory default setting. When attempting to
print data in the non-printable area defined by the Normal
setting, the printer clips the image at the boundary.
• Whole Page allows the image to be moved into the non-
printable area defined by the Normal setting, but the
printer will clip the image at the Normal setting boundary.
This affects only pages printed using a PCL 5e interpreter.
This has no effect on pages printed using the PCL XL or
PostScript interpreter.
- 220 -