Konica Minolta Bizhub 4020 User Manual page 196

Use
Content Type
Text
Graphics
Text/Photo
Photo
Content Source
Black/White Laser
Color Laser
Inkjet
Photo/Film
Magazine
Newspaper
Press
Other
Darkness
1–9
Dial Prefix
Dialing Prefix Rules
Prefix Rule [x]
Automatic Redial
0–9
Redial frequency
1–200
Behind a PABX
Yes
No
Enable ECM
Yes
No
User's Guide
To
Specify the content of the original document.
Note: Text is the factory default setting.
Specify how the original document was produced.
Note: Black/White Laser is the factory default setting.
Lighten or darken the output.
Note: 5 is the factory default setting.
Enter a dialing prefix, such as 99. A numeric entry field is provided.
Establish a dialing prefix rule.
Specify the number of times the printer tries to send the fax to a specified
number.
Note: 5 is the factory default setting.
Specify the number of minutes between redials.
Note: 3 is the factory default setting.
Enable or disable switchboard blind dialing without a dial tone.
Note: No is the factory default setting.
Enable or disable Error Correction Mode for fax jobs.
Note: Yes is the factory default setting.
- 196 -