Konica Minolta Bizhub 4020 User Manual page 223

Use
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Separator Source
Tray [x]
Multipurpose Feeder
Paper Saver
Off
2-Up
3-Up
4-Up
6-Up
9-Up
12-Up
16-Up
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
User's Guide
To
Specify whether or not blank separator sheets are inserted.
Notes:
• Off is the factory default setting.
• Between Copies inserts a blank sheet between each copy of a print job if
Collate is set to "(1,2,3) (1,2,3)." If Collate is set to "(1,1,1) (2,2,2)," then a
blank page is inserted between each set of printed pages, such as after all
page 1's and after all page 2's.
• Between Jobs inserts a blank sheet between print jobs.
•
Between Pages inserts a blank sheet between each page of a print job.
This setting is useful when printing transparencies or when inserting blank
pages in a document.
Specify the paper source for separator sheets.
Notes:
• Tray 1 (standard tray) is the factory default setting.
• From the Paper menu, set Configure MP to "Cassette" for Multipurpose
Feeder to appear as a menu setting.
Print multiple pages on one sheet of paper.
Notes:
• Off is the factory default setting.
• When the number of pages per sheet is selected, each page is scaled so
that the number of pages you want can be displayed on the sheet.
Specify the order in which pages are printed on a single sheet when using
Paper Saver.
Notes:
• Horizontal is the factory default setting.
• Positioning depends on the number of pages and whether they are in
portrait or landscape orientation.
- 223 -