Konica Minolta Bizhub 4020 User Manual page 199

Fax Receive Settings menu items and their descriptions
Use
Enable Fax Receive
On
Off
Fax Job Waiting
None
Toner
Toner and Supplies
Rings to Answer
1–25
Auto Reduction
On
Off
Paper Source
Auto
Tray [x]
Multi-Purpose Feeder
Sides (Duplex)
Off
On
Separator Sheets
Off
Before Job
After Job
Separator Sheet Source
Tray [x]
Multipurpose Feeder
User's Guide
To
Allow the printer to receive fax jobs.
Note: On is the factory default setting.
Remove fax jobs from the print queue when the job requires specific unavailable
resources.
Note: None is the factory default setting.
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
Scale an incoming fax job so that it fits the size of the paper loaded in the
designated fax source.
Note: On is the factory default setting.
Specify the paper source for printing incoming fax jobs.
Note: Auto is the factory default setting.
Enable two-sided (duplex) printing for incoming fax jobs.
Notes:
• Off is the factory default setting.
• This menu item appears only when a print duplexer is installed.
Enable the printer to include separator sheets for incoming fax jobs.
Note: Off is the factory default setting.
Specify where the printer will pick the separator sheet.
Note: Tray 1 is the factory default setting.
- 199 -