Initial Fax Setup; Using The Embedded Web Server For Fax Setup - Konica Minolta Bizhub 4020 User Manual

Initial fax setup

Many countries and regions require outgoing faxes to contain the following information in a margin at the
top or bottom of each transmitted page, or on the first page of the transmission: fax name (identification of
the business, other entity, or individual sending the message) and fax number (telephone number of the
sending fax machine, business, other entity, or individual).
To enter your fax setup information, use the printer control panel, or use your browser to access the
Embedded Web Server and then enter the Settings menu.
Note: If you do not have a TCP/IP environment, then you must use the printer control panel to enter your
fax setup information.
Using the printer control panel for fax setup
When the printer is turned on for the first time, a series of start-up screens appear. If the printer has fax
capabilities, then the Fax Name and Fax Number screens appear.
1. When the Fax Name screen appears, do the following:
a. Enter the name to be printed on all outgoing faxes.
b. Enter the fax name, and then touch Submit.
2. When the Fax Number screen appears, enter the fax number, and then touch Submit.

Using the Embedded Web Server for fax setup

1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Fax Settings >Analog Fax Setup.
3. In the Fax Name field, type the name to be printed on all outgoing faxes.
User's Guide
- 114 -