Konica Minolta Bizhub 4020 User Manual page 184

Use
Timeouts
Sleep Mode
Disabled
1–120
Timeouts
Timeout
Disabled
1 hour
2 hours
3 hours
6 hours
1 day
2 days
3 days
1 week
2 weeks
1 month
Hibernate Timeout on Connection
Hibernate
Do Not Hibernate
Timeouts
Screen Timeout
15–300
User's Guide
To
Set the amount of time in minutes the printer waits after a job
is printed before it goes into a reduced power state.
Notes:
• 30 is the factory default setting.
• Disabled appears only when Energy Conserve is set to
Off.
• Lower settings conserve more energy, but may require
longer warm-up times.
•
Select a high setting if the printer is in constant use. Under
most circumstances, this keeps the printer ready to print
with minimum warm-up time.
Set the amount of time the printer waits before it goes to
Hibernate mode.
Notes:
• Disabled is the factory default setting for printers except in
European Union countries and Switzerland.
• "3 days" is the factory default setting for Class B printers
in European Union countries and Switzerland.
Set the printer to hibernate mode even when there is an active
Ethernet or fax connection.
Notes:
• Do Not Hibernate is the factory default setting.
• The fax function is available only in select printer models.
Set the amount of time in seconds the printer waits before
returning the display to the Ready state.
Note: 30 is the factory default setting.
- 184 -