Konica Minolta Bizhub 4020 User Manual page 177

Use
Eco-Mode
Off
Energy
Energy/Paper
Paper
ADF Loaded Beep
Enabled
Disabled
Quiet Mode
Off
On
Run Initial setup
Yes
No
User's Guide
To
Minimize the use of energy, paper, or specialty media.
Notes:
• Off is the factory default setting. This resets the printer to
its factory default settings.
• Energy minimizes the power used by the printer.
Performance may be affected, but print quality is not.
• Energy/Paper minimizes the use of power and of paper
and specialty media.
•
Paper minimizes the amount of paper and specialty media
needed for a print job. Performance may be affected, but
print quality is not.
Specify whether or not the ADF sounds a beep when paper is
loaded.
Note: Enabled is the factory default setting.
Reduce the amount of noise produced by the printer.
Notes:
• Off is the factory default setting. This supports the
performance specifications for your printer.
•
On configures the printer to produce as little noise as
possible. This is best suited for printing text and line art.
• Selecting Photo from the printer driver may disable Quiet
Mode and provide better print quality and full-speed
printing.
Run the setup wizard.
Notes:
•
Yes is the factory default setting.
• After completing the setup wizard by selecting Done at the
country or region selection screen, the default becomes
No.
- 177 -