15. SERVICE MENU (magicolor 1650EN)
15.8 PRINT SETTINGS
Function
• To print the list of engine adjusted values.
Use
• To confirm every adjusted values set at SERVICE MENU.
Setting
• The default setting is YES.
/procedure
15.9 BK CLEAR
Function
• To clear engine information backup data
Use
• Use when the engine information backup data is cleared.
YES: Executes data clear
NO: Does not execute data clear
NOTE
• Execute this function to synchronize data when the MFP board or the printer
control board is replaced with a new one.
Setting
• The default setting is YES.
/procedure
15.10 FUSER UNLOCK
Function
• The engine will lock when there are two consecutive increases of fuser warm-up fail-
ures (SERVICE CALL 0500) or Thermistor resistance failures (SERVICE CALL
Use
0503) and the printer cannot be reset by turning the power OFF/ON.
This command resets the lock to restore functionality.
Setting
• The default setting is YES.
/procedure
1. Enter the SERVICE MENU.
2. Select [FUSER UNLOCK], and press the Menu Select key.
3. Select [YES], and press the Menu Select key.
4. Confirm [POWER CYCLE THE PRINTER NOW] is displayed and turn OFF/ON the
power.
15.11 CIE COLORSPACE
Function
• Prints color spaces precisely using CIE standard color instead of CMYK.
CMYK: Improves printing capability (speed)
Use
CIE: Prints color spaces precisely
Setting
• The default setting is CMYK.
/procedure
92
Field Service Ver. 1.0 Nov. 2008
"YES" / NO
"YES" / NO
"YES" / NO
"CMYK" / CIE