Specifying The Default Print Settings For This Machine; Specifying The Default Print Settings - Konica Minolta bizhub C754 User Manual

8
8.10

Specifying the default print settings for this machine

8.10.1

Specifying the default print settings

These settings are used for operations unless specified through the printer driver. You can configure default
settings for tray, finisher processing, and the number of copies.
In the administrator mode, select [Print Setting] - [Basic Setting], then configure the following settings.
Settings
[PDL Setting]
[Paper Tray]
[Output Tray]
[2-Sided Print]
[Bind Direction]
[Staple]
[Punch]
8-30
Specifying the default print settings for this machine
Description
Select the Page Description Language. When you select [Auto], this ma-
chine automatically switches between PCL and PS.
[Auto] is specified by default.
Select the paper tray for the printing paper.
[Auto] is specified by default.
Select the primary output tray.
[Tray 3] is specified by default.
Select whether to print an original on both sides of paper when data con-
taining multiple pages is printed.
[OFF] is specified by default.
Select the binding position for 2-sided printing.
[Left Bind] is specified by default.
Select whether to staple printed sheets. To staple printed sheets, select
the number of staples.
[OFF] is specified by default.
Select whether to punch printed sheets. To punch printed sheets, select
the required number of punched holes.
[OFF] is specified by default.
8.10
bizhub C754/C654