Konica Minolta Bizhub 4020 User Manual page 95

Example 1: Copying on mixed paper sizes
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the home screen, navigate to:
Copy >Copy from >Mixed Sizes >Copy to >Auto Size Match >Copy It
The scanner identifies the different paper sizes as they are scanned. Copies are printed on mixed
paper sizes corresponding to the paper sizes of the original document.
Example 2: Copying on a single paper size
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the home screen, navigate to:
Copy >Copy from >Mixed Sizes >Copy to >Letter >Copy It
The scanner identifies the different paper sizes as they are scanned, and then scales the mixed
paper sizes to fit on the paper size selected.
Copying on both sides of the paper (duplexing)
1. Load an original document faceup, short edge first into the ADF tray or facedown on the scanner
glass.
Notes:
- Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as
magazine clippings) into the ADF tray. Place these items on the scanner glass.
- The ADF indicator light comes on when the paper is loaded properly.
2. If you are loading a document into the ADF tray, then adjust the paper guides.
3. From the home screen, navigate to:
Copy >Sides (Duplex) > select the preferred duplexing method
User's Guide
- 95 -