Pcl Emul Menu - Konica Minolta Bizhub 4020 User Manual

PCL Emul menu

Use
Font Source
Resident
Download
All
Font Name
Courier 10
Symbol Set
10U PC-8
12U PC-850
PCL Emulation Settings
Point Size
1.00–1008.00
PCL Emulation Settings
Pitch
0.08–100.00
User's Guide
To
Specify the set of fonts used in the Font Name menu.
Notes:
• "Resident" is the factory default setting. It shows the factory default set
of fonts downloaded in the RAM.
• "Download" shows all the fonts downloaded in the RAM.
• "All" shows all fonts available to any option.
Identify a specific font and where it is stored.
Note: Courier 10 is the factory default setting.
Specify the symbol set for each font name.
Notes:
• 12U PC-850 is the factory default setting.
• A symbol set is a set of alphabetical and numeric characters,
punctuation, and special symbols. Symbol sets support the different
languages or specific programs, such as math symbols for scientific
text. Only the supported symbol sets are shown.
Change the point size for scalable typographic fonts.
Notes:
• 12 is the factory default setting.
• Point size refers to the height of the characters in the font. One point
equals approximately 0.014 of an inch. This can be increased or
decreased in 0.25-point increments.
Specify the font pitch for scalable monospaced fonts.
Notes:
• 10 is the factory default setting.
• Pitch refers to the number of fixed-space characters per inch (cpi).
This can be increased or decreased in 0.01-cpi increments.
• For non-scalable monospaced fonts, the pitch appears on the display
but cannot be changed.
- 232 -