Delayed Send - Konica Minolta Bizhub 4020 User Manual

• Photo/Film—The original document is a photo from film.
• Press—The original document was printed using a printing press.
Resolution
This option lets you adjust the quality of the fax output. Increasing the image resolution increases the file
size and the time needed to scan your original document. Decreasing the image resolution reduces the
file size.
Select one of the following:
• Standard—Use this when faxing most documents.
• Fine 200 dpi—Use this when faxing documents with small prints.
• Super fine 300 dpi—Use this when faxing documents with fine details.
• Ultra fine 600 dpi—Use this when faxing documents with pictures or photos.
Darkness
This option lets you adjust how light or dark the faxes are in relation to the original document.
Page Setup
This option lets you change the following settings:
• Sides (Duplex)—This specifies if the original document is printed on one side or on both sides of the
page (duplex). This also identifies what needs to be scanned for inclusion in the fax.
• Orientation—This specifies the orientation of the original document, and then changes the Sides
(Duplex) and Binding settings to match the orientation.
• Binding—This specifies if the original document is bound on the long-edge or short-edge side.
Custom Job
This option lets you combine multiple scan jobs into a single job and appears only when a working printer
hard disk is installed.
Scan Preview
This option lets you view the first page of the image before it is included in the fax. When the first page is
scanned, the scanning is paused and a preview image appears.
Note: This option appears only when a working printer hard disk is installed.

Delayed Send

This option lets you send a fax at a later time or date.
User's Guide
- 133 -