Konica Minolta Bizhub 4020 User Manual page 56

2. Select a wireless connection setup.
Use
Search for networks
Enter a network name
Wi-Fi Protected Setup
3. Follow the instructions on the printer display.
Connecting the printer to a wireless network using Wi-Fi Protected Setup
Before you begin, make sure that:
• The access point (wireless router) is Wi-Fi Protected Setup (WPS) certified or WPS-compatible. For
more information, see the documentation that came with your access point.
• A wireless network adapter installed in your printer is attached and working properly. For more
information, see the instruction sheet that came with the wireless network adapter.
Using the Push Button Configuration method
1. From the printer control panel, navigate to:
>Network/Ports >Network [x] >Network [x] Setup >Wireless >Wi-Fi Protected Setup >Start
Push Button Method
2. Follow the instructions on the printer display.
Using the Personal Identification Number (PIN) method
1. From the printer control panel, navigate to:
>Network/Ports >Network [x] >Network [x] Setup >Wireless >Wi-Fi Protected Setup >Start
PIN Method
2. Copy the eight-digit WPS PIN.
3. Open a Web browser, and then type the IP address of your access point in the address field.
Notes:
- The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
4. Access the WPS settings. For more information, see the documentation that came with your access
point.
User's Guide
To
Show available wireless connections.
Note: This menu shows all broadcast secured or unsecured SSIDs.
Manually type the SSID.
Note: Make sure to type the correct SSID.
Connect the printer to a wireless network using Wi-Fi Protected Setup.
- 56 -