Konica Minolta Bizhub 4020 User Manual page 212

Use
File Name
Custom Job Scanning
On
Off
Scan Preview
On
Off
Allow Save as Shortcut
On
Off
Background Removal
-4 to 4
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
-4 to 4
User's Guide
To
Type a base file name.
Note: You can enter up to 53 characters.
Copy a document that contains mixed paper sizes into a single scan job.
Note: Off is the factory default setting.
Specify whether a preview will appear on the display for scan jobs.
Notes:
• Off is the factory default setting.
• This menu item appears only when a formatted, working printer hard disk is
installed.
Enable shortcut creation for FTP addresses.
Note: On is the factory default setting.
Adjust the amount of background visible on a copy.
Note: 0 is the factory default setting.
Specify the contrast of the output.
Note: "Best for content" is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
- 212 -