Installing Optional Trays - Konica Minolta Bizhub 4020 User Manual

CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional
hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug
the power cord from the electrical outlet before continuing. If you have any other devices attached to the
printer, then turn them off as well, and unplug any cables going into the printer.
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for
stability. You must use either a printer stand or printer base if you are using a high-capacity tray and an
input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans,
copies, and faxes, you may need additional furniture.
Install the printer and any hardware options you have purchased in the following order:
• Printer stand
• Optional 250- or 550-sheet tray
• Printer
For more information on installing a printer stand, optional 250- or 550-sheet tray, or spacer, see the
setup sheet that came with the option.

Installing optional trays

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two
or more trained personnel to lift it safely.
CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional
hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug
the power cord from the electrical outlet before continuing. If you have any other devices attached to the
printer, then turn them off as well, and unplug any cables going into the printer.
CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for
stability. You must use either a printer stand or printer base if you are using a high-capacity tray and an
input option, or more than one input option. If you purchased a multifunction printer (MFP) that scans,
copies, and faxes, you may need additional furniture.
1. Turn off the printer using the power switch, and then unplug the power cord from the electrical outlet.
User's Guide
- 45 -