Appletalk Menu - Konica Minolta Bizhub 4020 User Manual

AppleTalk menu

Note: This menu is available only in printer models connected to a wired network or when an optional
network card is installed.
To access the menu, navigate to any of the following:
• Network/Ports >Standard Network >Standard Network Setup >AppleTalk
• Network/Ports >Network Setup [x] >AppleTalk
Use
Activate
Yes
No
View Name
View Address
Set Zone
[list of zones available on the
network]
User's Guide
To
Enable or disable AppleTalk support.
Note: Yes is the factory default setting.
Show the assigned AppleTalk name.
Note: The name can be changed only from the Embedded Web Server.
Show the assigned AppleTalk address.
Note: The address can be changed only from the Embedded Web Server.
Provide a list of AppleTalk zones available on the network.
Note: The factory default setting is the default zone for the network. If no
default zone exists, then the zone marked with an asterisk (*) is the default
setting.
- 166 -