Removing A Printer Hard Disk - Konica Minolta Bizhub 4020 User Manual

c. Align the screws on the printer hard disk to the slots on the controller board bracket, and then
slide the printer hard disk onto the brackets.
d. Tighten the two screws.
4. Close the controller board shield, and then close the controller board access door.
Note: When the printer software and any hardware options are installed, you may need to manually
add the options in the printer driver to make them available for print jobs. For more information, see
Updating available options in the printer

Removing a printer hard disk

Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch something metal on the printer before touching any controller board electronic
components or connectors.
1. Access the controller board.
For more information, see
Note: This task requires a flathead screwdriver.
User's Guide
driver.
Accessing the controller
- 43 -
board.