Verifying Printer Setup - Konica Minolta Bizhub 4020 User Manual

2. Add the printer.
- For IP printing:
1. From the Apple menu, navigate to either of the following:
- (For Mac OS X v10.3/v10.4/v10.5/v10.6)
System preferences > Print & Fax
- (For Mac OS X v10.7/v10.8)
System preferences > Print & Scan
2. Click +.
3. Click the IP tab.
4. Type the printer IP address in the address field, and then click Add.
- For AppleTalk printing:
Notes:
• Make sure AppleTalk is activated on your printer.
• This feature is supported only in Mac OS X version 10.3/10.4/10.5.
1. From the Apple menu, navigate to:
System Preferences > Print & Fax
2. Click +, and then navigate to:
AppleTalk > select the printer >Add

Verifying printer setup

When all hardware and software options are installed and the printer is turned on, verify that the printer is
set up correctly by printing the following:
• Menu settings page—Use this page to verify that all printer options are installed correctly. If an
option you installed is not listed, then it is not installed correctly. Remove the option, and then install it
again.
• Network setup page—If your printer has networking support, then use this page to verify that the
network connection is working. This page also provides important information that aids network
printing configuration.
Printing a menu settings page
From the home screen, navigate to:
> Reports > Menu Settings Page
User's Guide
- 59 -