Konica Minolta Bizhub 4020 User Manual page 117

Tips for this setup:
• If you have only one telephone number on your line, then you need to set the printer to receive faxes
automatically (Auto Answer On).
• Set the printer to pick up calls two rings after the answering machine. For example, if the answering
machine picks up calls after four rings, then set the printer to pick up after six rings. This way, the
answering machine picks up calls first and your voice calls are received. If the call is a fax, then the
printer detects the fax signal on the line and takes over the call.
•
If you subscribe to a distinctive ring service provided by your telephone company, then make sure
that you set the correct ring pattern for the printer. Otherwise, the printer does not receive faxes even
if you have set it to receive faxes automatically.
Setup 3: Printer is sharing the line with a telephone subscribed to voice mail service
To connect:
1. Connect one end of the telephone cable that came with the printer to the
2. Connect the other end of the telephone cable to an active analog wall jack.
3. Connect the telephone to the
Tips for this setup:
• This setup works best if you subscribe to a distinctive ring service. If you have distinctive ring service,
then make sure that you set the correct ring pattern for the printer. Otherwise, the printer does not
receive faxes even if you have set it to receive faxes automatically.
User's Guide
port of the printer.
- 117 -
port of the printer.