Konica Minolta Bizhub 4020 User Manual page 9

■ Warning and Caution Symbols
The labels and symbols used in this manual and on the printer help prevent injury to the
operator and others around the printer as well as damage to property. Those labels and
symbols have the following meanings:
WARNING
CAUTION
●Meaning of Symbols
indicates a danger against which you should take precaution.
The symbol shown to the left warns against possible electrical shock.
indicates a prohibited course of action.
The symbol shown to the left warns against dismantling the device.
indicates an imperative course of action.
The symbol shown to the left indicates that you must unplug the device.
WARNING
• Do not attempt to remove any of the covers and panels attached to the printer. Some printers
have a high-voltage part or a laser beam source inside that could cause an electrical shock or
blindness.
• Do not modify the printer, as a fire, electrical shock, or breakdown could result. If the printer
employs a laser, the laser beam source could cause blindness.
• Use only the power cord supplied in the package. If a power cord is not supplied, use only the
power cord and plug that are specified in the user documentation. Failure to use this cord could
result in a fire or electrical shock.
• Use the power cord supplied in the package only with this printer; NEVER use it for another
product. Failure to observe this precaution could result in a fire or electrical shock.
• Use only a power source of the specified voltage. Failure to do that could result in a fire or
electrical shock.
• Do not use a multiple outlet adapter to connect any other products. Exceeding the rating of a
power outlet could result in a fire or electrical shock.
• Do not use an extension cord, as this could cause a fire or electrical shock. Contact your
authorized service provider if an extension cord is required.
• Do not scratch, rub, place a heavy object on, heat, twist, bend, pull on, or damage the power
cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire
or breakdown. Should any of the described conditions have occurred, immediately turn off and
unplug the printer, and then call your authorized service provider.
Do not unplug and plug in the power cord with wet hands, as an electrical shock could result.
Plug the power cord all the way into the power outlet. Failure to do this could result in a fire or
electrical shock.
User's Guide
Ignoring this warning could cause serious injury or even death.
Ignoring this caution could cause injury or damage to property.
- 9 -