Smtp Setup Menu - Konica Minolta Bizhub 4020 User Manual

Use
ENA Gateway
yyy.yyy.yyy.yyy

SMTP Setup menu

Use
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30
Reply Address
Use SSL
Disabled
Negotiate
Required
SMTP Server Authentication
No authentication required
Login/Plain
CRAM-MD5
Digest-MD5
NTLM
Kerberos 5
User's Guide
To
Set the gateway information for an external print server.
Note: This menu is available only when the printer is attached to an external
print server through the USB port.
To
Specify SMTP server gateway and port information.
Note: 25 is the default SMTP gateway port.
Specify the amount of time in seconds before the server stops trying
to send an e-mail.
Note: 30 is the factory default setting.
Specify a reply address of up to 128 characters in the e-mail sent by
the printer.
Set the printer to use SSL for increased security when connecting to
the SMTP server.
Notes:
• Disabled is the factory default setting.
• When the Negotiate setting is used, the SMTP server determines
if SSL will be used.
Specify the type of user authentication required for scan to e-mail
privileges.
Note: "No authentication required" is the factory default setting.
- 169 -