Konica Minolta Bizhub 4020 User Manual page 119

3. To continue using a computer for Internet access, connect the computer to the DSL HPN port on the
DSL filter.
4. To connect a telephone to the printer, remove any installed adapter plug from the
printer, and then connect the telephone to the port.
Scenario 3: VoIP telephone service
To connect:
1. Connect one end of the telephone cable that came with the printer to the
2. Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the VoIP
adapter.
Note: The port labeled Phone Line 2 or Fax Port is not always active. VoIP providers may charge
additional cost for activation of the second phone port.
3. Connect the telephone to the
Tips for this setup:
• To make sure that the phone port on the VoIP adapter is active, plug an analog telephone into the
phone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.
User's Guide
port of the printer.
- 119 -
port of the
port of the printer.