Konica Minolta Bizhub 4020 User Manual page 10

Konica minolta bizhub 4020 laser printer user's guide
Hide thumbs Also See for Bizhub 4020:
Table of Contents

Advertisement

WARNING
Connect the power cord to an electrical outlet that is equipped with a grounding terminal.
Do not place metal clips, any other small metallic objects, or a container containing liquid on
the printer. Liquid and metallic objects dropped inside the printer could result in a fire, electrical
shock, or breakdown.
Should liquid, a piece of metal, or any other foreign matter fall inside the printer, immediately
turn off and unplug the printer, and then call your authorized service provider.
• Do not use your printer if it becomes excessively hot, emits smoke or an unusual odor, or
makes an unusual noise. Immediately turn off and unplug the printer, and then call your
authorized service provider. If you continue using the printer, a fire or electrical shock could
result.
• Do not use this printer if it has been dropped or the cover has been damaged. Immediately turn
off and unplug the printer, and then call your authorized service provider. If you continue using
the printer, a fire or electrical shock could result.
Do not burn toner cartridges or toner. The hot toner may scatter and cause burns or other
damage.
CAUTION
• Do not expose the printer to dust, soot, or steam, or place it near a kitchen table, bath, or
humidifier. A fire, electrical shock, or breakdown could result.
• Do not place the printer on an unstable or tilted table, or in a location subject to a lot of
vibration and shock. The printer could fall, causing personal injury or mechanical breakdown.
After installing this product, place it on a sturdy base. It the printer moves or falls, it may cause
personal injury.
Certain areas inside the printer may become very hot and cause burns.
When checking the inside of the printer for malfunctions such as media jams, do not touch the
locations (around the fusing unit, etc.) labeled "Caution HOT."
• Do not obstruct the printer's ventilation grilles. Heat could accumulate inside the printer,
resulting in a fire or malfunction.
• Do not use flammable sprays, liquids, or gases near the printer, as a fire could result.
• Do not pull on the power cord when unplugging it. Pulling on the power cord could damage it,
resulting in a fire or electrical shock.
• Do not place any objects around the power plug, as it may be difficult to unplug when an
emergency occurs.
• Do not store toner cartridges and PC drum units near computer disks or watches that are
susceptible to magnetism, as they could cause them to malfunction.
• Do not leave toner cartridges or PC drum units within reach of children. Ingesting toner could
be harmful to your health.
• Whenever moving the printer, be sure to disconnect the power cord and other cables. Failure
to do this could damage the cord or cable, resulting in a fire, electrical shock, or breakdown.
• Unplug the printer if you are not going to use it for a long period of time.
• When moving the printer, always hold it as specified in the user documentation. If the printer
falls, it may cause severe personal injury and/or be damaged.
• Use the printer only in a well-ventilated location. Operating the printer in a poorly ventilated
room for an extended period of time could be harmful to your health. Ventilate the room at
regular intervals.
• Remove the power cord from the outlet more than once a year and clean between the plug
terminals. Dust that accumulates between the plug terminals may cause a fire.
User's Guide
- 10 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents