Konica Minolta Bizhub 4020 User Manual page 278

Insufficient memory for Flash Memory Defragment operation [37]
Try one or more of the following:
• From the printer control panel, select Continue to stop the defragmentation and continue printing. For
non-touch-screen printer models, press
• Delete fonts, macros, and other data from the printer memory.
• Install additional printer memory.
Insufficient memory to collate job [37]
Try one or more of the following:
• From the printer control panel, select Continue to print the part of the job already stored and begin
collating the rest of the print job. For non-touch-screen printer models, press
• Cancel the current print job.
Insufficient memory to support Resource Save feature [35]
Install additional printer memory or select Continue on the printer control panel to disable Resource Save,
clear the message, and continue printing. For non-touch-screen printer models, press
Load manual feeder with [custom string] [paper orientation]
Try one or more of the following:
• Load the feeder with the correct size and type of paper.
• Depending on your printer model, touch Continue or press
printing.
Note: If no paper is loaded in the feeder when Continue or
automatically overrides the request, and then prints from an automatically selected tray.
• Cancel the current job.
Load manual feeder with [custom type name] [paper orientation]
Try one or more of the following:
• Load the multipurpose feeder with the correct size and type of paper.
User's Guide
to confirm.
- 278 -
to confirm.
to confirm.
to clear the message and continue
is selected, then the printer