Initial Setup; Clearing Stored Settings - Konica Minolta bizhub 131f Advanced Information

Layout and installation
3.5

Initial Setup

3.5.1

Clearing stored settings

Before use your machine, clear the built-in user data memory. This ensures
the memory will hold only your settings.
7IMPORTANT
After you set the initial settings, do not clear the memory again unless an
%
authorized technician asks you to do so.
To clear the memory:
1
Press [Menu], [1], [0], [2].
2
If you do want to clear the memory, press [Enter].
If you do not want to clear the memory, just press [Cancel].
bizhub 131f/190f
3
3-17